Hoop 1 layer tear away or one layer Water soluble vilene

Spray with 505 adhesive spray

Place one layer of Heattex (Heat resistant batting)

Spray again with 505 adhesive spray

Place one layer of polyester cotton fabrick in the color of your choice on top of the Heattex.

Turn the hoop and spray with 505.

Place a piece of the same fabrick to the backside of the hoop

Use Lubricant spray.....

to the spray the machine needle when working with adhesive spray

Stitch the first color of the design. Take away from machine but keep in hoop.

Cut the Heattex and the fabrick away close to the edge.

Cut the fabrick on the back side away close to the edge

 Cut a 12cm piece of ribbon. Fold in half and tape in the corner.

A closer view

Put back in machine and stitch the next color.

Remove from machine but keep in hoop